A193-B7/A194-2H COLOR STUD BOLTS
Full threaded rods are standard, widely available fasteners used across multiple construction applications.
Full threaded rods are standard, widely available fasteners used across multiple construction applications.
Product Introduction
Fully threaded rods are widely used, readily available fasteners for a variety of construction applications. They are continuously threaded from one end to the other and are commonly known as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod), and many other names and acronyms. Rods are typically stocked and sold in 3', 6', 10' and 12' lengths, or they can be cut to a specific length.
All-thread rod cut to shorter lengths is often referred to as studs or fully threaded studs. Fully threaded studs have no head, are threaded along their entire length, and offer higher tensile strength. These studs are typically fastened using two nuts and are used for applications requiring fast assembly and disassembly. Used as a pin to connect two materials, threaded rods are suitable for fastening wood or metal. Fully threaded rods are available in anti-corrosion stainless steel, alloy steel, and carbon steel, helping ensure the structure is not weakened by rust.
Applications
Fully threaded rods are used in many construction applications. They can be installed in existing concrete slabs and used as epoxy anchors. Short studs can be coupled with another fastener to extend the required length. All-thread rod can also serve as an alternative to anchor rods, used for pipe flange connections, and used as double arming bolts in the pole line industry. There are many other construction applications in which all-thread rod or fully threaded studs are used.
Black-oxide steel screws provide mild corrosion resistance in dry environments. Zinc-plated steel screws resist corrosion in wet environments. Black, ultra-corrosion-resistant coated steel screws resist chemicals and can withstand 1,000 hours of salt spray. Coarse threads are the industry standard; choose these screws if you do not know the threads per inch. Fine and extra-fine threads are closely spaced to help prevent loosening caused by vibration—the finer the thread, the better the resistance.
Grade 2 bolts are commonly used in construction for joining wood components. Grade 4.8 bolts are used in small engines. Grade 8.8, 10.9, or 12.9 bolts provide high tensile strength. One advantage of bolt fasteners over welds or rivets is that they enable easy disassembly for repairs and maintenance.

|
Threaded specifications d |
M2 |
M2.5 |
M3 |
(M3.5) |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
(M14) |
M16 |
(M18) |
|||||||||||||
|
P |
coarse thread |
0.4 |
0.45 |
0.5 |
0.6 |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
||||||||||||
|
closely-pitched |
/ |
/ |
/ |
/ |
/ |
/ |
1 |
1.25 |
1.5 |
1.5 |
1.5 |
1.5 |
||||||||||||||
|
closely-pitched |
/ |
/ |
/ |
/ |
/ |
/ |
1 |
1.25 |
/ |
/ |
/ |
|||||||||||||||
|
Thousand pieces of weight (steel), kg |
18.7 |
30 |
44 |
60 |
78 |
124 |
177 |
319 |
500 |
725 |
970 |
1330 |
1650 |
|||||||||||||
|
Threaded specifications d |
M20 |
(M22) |
M24 |
(M27) |
M30 |
(M33) |
M36 |
(M39) |
M42 |
(M45) |
M48 |
(M52) |
||||||||||||||
|
P |
coarse thread |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
|||||||||||||
|
closely-pitched |
1.5 |
1.5 |
2 |
2 |
2 |
2 |
3 |
3 |
3 |
3 |
3 |
|||||||||||||||
|
closely-pitched |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|||||||||||||||
|
Thousand pieces of weight (steel), kg |
2080 |
2540 |
3000 |
3850 |
4750 |
5900 |
6900 |
8200 |
9400 |
11000 |
12400 |
14700 |
||||||||||||||