FLAT WASHERS
Flat washers are used to increase the bearing surface of a nut or fastener head, spreading the clamping force over a larger area.
Flat washers are used to increase the bearing surface of a nut or fastener head, spreading the clamping force over a larger area.
Product Introduction
Flat washers are used to increase the bearing surface of a nut or fastener head, thereby distributing the clamping force over a larger area. They are particularly useful when working with soft materials and with oversized or irregularly shaped holes.
Washer size refers to the nominal hole size and is based on the corresponding screw size. The outside diameter (OD) is always larger. Size and OD are typically specified in fractional inches; decimal inches may also be used. Thickness is generally listed in decimal inches, although we often convert it to fractional inches for convenience.
Grade 2 flat washers should be used only with Grade 2 hex cap screws (hex bolts). For Grade 5 and 8 cap screws, use hardened flat washers. Since Grade 2 flat washers are made of soft, low-carbon steel, they may “yield” (i.e., compress, cup, bend, etc.) under the higher torque values typically associated with Grade 5 and 8 cap screws. As a result, clamping force may be reduced as the washer deforms.
Flat washers are commonly available in a variety of materials, including aluminum, brass, nylon, silicon bronze, stainless steel, and steel. Unplated or uncoated steel—referred to as “plain finish”—has not been surface-treated to prevent rust, other than a light coating of oil for temporary protection. Therefore, common steel finishes include zinc plating and hot-dip galvanizing.
Applications
Due to their design, plain washers help prevent damage to the assembled surfaces by distributing the load. A flat washer has a thin, flat profile with a central hole. This type of washer provides support for the smaller head of the screw.
Black-oxide steel washers offer mild corrosion resistance in dry environments. Zinc-plated steel washers resist corrosion in wet environments. Black ultra-corrosion-resistant-coated steel washers provide chemical resistance and can withstand 1,000 hours of salt spray.

|
Specifications |
Φ1 |
Φ1.2 |
Φ1.4 |
Φ1.6 |
Φ2 |
Φ2.5 |
Φ3 |
Φ4 |
Φ5 |
Φ6 |
Φ8 |
Φ10 |
||
|
d |
Crest value |
1.22 |
1.42 |
1.62 |
1.82 |
2.32 |
2.82 |
3.36 |
4.36 |
5.46 |
6.6 |
8.6 |
10.74 |
|
|
Least value |
1.1 |
1.3 |
1.5 |
1.7 |
2.2 |
2.7 |
3.2 |
4.2 |
5.3 |
6.4 |
8.4 |
10.5 |
||
|
dc |
Crest value |
3 |
3.2 |
3.5 |
4 |
5 |
6.5 |
7 |
9 |
10 |
12.5 |
17 |
21 |
|
|
Least value |
2.75 |
2.9 |
3.2 |
3.7 |
4.7 |
6.14 |
6.64 |
8.64 |
9.64 |
12.07 |
16.57 |
20.48 |
||
|
h |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.5 |
0.5 |
0.8 |
0.8 |
1.5 |
1.5 |
2 |
||
|
Thousand-piece weight (steel) kg |
0.0014 |
0.0016 |
0.018 |
0.024 |
0.037 |
0.108 |
0.12 |
0.308 |
0.354 |
1.066 |
2.021 |
4.078 |
||
|
Specifications |
Φ12 |
(Φ14) |
Φ16 |
(Φ18) |
Φ20 |
(Φ22) |
Φ24 |
(Φ27) |
Φ30 |
Φ36 |
Φ42 |
Φ48 |
||
|
d |
Crest value |
13.24 |
15.24 |
17.24 |
19.28 |
21.28 |
23.28 |
25.28 |
28.28 |
31.34 |
37.34 |
43.34 |
50.34 |
|
|
Least value |
13 |
15 |
17 |
19 |
21 |
23 |
25 |
28 |
31 |
37 |
43 |
50 |
||
|
dc |
Crest value |
24 |
28 |
30 |
34 |
37 |
39 |
44 |
50 |
56 |
66 |
78 |
92 |
|
|
Least value |
|
23.48 |
27.48 |
29.48 |
33.38 |
36.38 |
38.38 |
43.38 |
49.38 |
55.26 |
91.13 |
|||
|
h |
2 |
2 |
3 |
3 |
3 |
3 |
4 |
4 |
4 |
5 |
7 |
8 |
||
|
Thousand-piece weight (steel) kg |
5.018 |
6.892 |
11.3 |
14.7 |
17.16 |
18.42 |
32.33 |
42.32 |
53.64 |
92.07 |
182.8 |
294.1 |
||