WEDGE ANCHORS
A wedge anchor is a mechanical expansion anchor made of four parts: a threaded anchor body, an expansion clip, a nut, and a washer. It delivers the highest and most consistent holding values among mechanical type expansion anchors.
A wedge anchor is a mechanical expansion anchor made of four parts: a threaded anchor body, an expansion clip, a nut, and a washer. It delivers the highest and most consistent holding values among mechanical type expansion anchors.
Product Introduction
A wedge anchor is a mechanical expansion anchor consisting of four components: a threaded anchor body, an expansion clip, a nut, and a washer. These anchors deliver the highest and most consistent holding values among mechanical expansion anchors.
To ensure safe and proper wedge anchor installation, the following technical specifications must be considered. Wedge anchors are available in a range of diameters and lengths, with varying thread lengths, and are supplied in three materials: zinc-plated carbon steel, hot-dipped galvanized steel, and stainless steel. Wedge anchors are intended for use only in solid concrete.
Applications
Installing wedge anchors can be completed in five easy steps. First, insert the anchor into a pre-drilled hole, then expand the wedge by tightening the nut to securely anchor it into the concrete.
Step 1: Drill a hole in the concrete. Select a diameter suitable for the wedge anchor.
Step 2: Clean out the hole of all debris.
Step 3: Place the nut on the end of the wedge anchor (to protect the anchor threads during installation).
Step 4: Insert the wedge anchor into the hole. Use a hammer to drive the wedge anchor to the required depth.
Step 5: Tighten the nut to the specified best condition.
Zinc-plated and zinc yellow-chromate plated steel anchors are corrosion resistant in wet environments. Galvanized steel anchors provide higher corrosion resistance than zinc-plated steel anchors. They must be used with other galvanized fasteners.


