KACANG FLANGE

Deskripsi Singkat:

mur flensa adalah salah satu mur paling umum yang tersedia dan digunakan dengan jangkar, baut, sekrup, stud, batang berulir, dan pengikat lainnya yang memiliki ulir sekrup mesin. Flange berarti mereka memiliki bagian bawah flensa. Mur Flange Metrik menyerupai dan sering digunakan dengan Baut Flange.

HUBUNGI SEKARANG unduh ke pdf

Membagikan

Detil

Tag

perkenalan produk

flange nuts are one of the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. Flange is which means they have flange bottom. Metric Flange Nuts resemble and are frequently used with Flange Bolts. They share the same flange that flares to a diameter that's larger than the hex section and machine screw threads that are either coarse or fine; the bearing surface can be smooth or serrated. Use serrated to resist loosening. Steel strength grades include Class 8 and 10 with a plain or zinc plated finish.

To ensure full thread engagement with the flange nuts, bolts/screws should be long enough to allow at least two full threads to extend beyond the nut face after tightening. Conversely, there should be two full threads exposed on the head side of the nut to make sure the nut can be properly tightened.

Aplikasi

mur flensa dapat digunakan untuk berbagai aplikasi yang mencakup pengikat kayu, baja, dan bahan konstruksi lainnya untuk proyek seperti dermaga, jembatan, struktur jalan raya, dan bangunan.

Black-oxide steel screws are mildly corrosion resistant in dry environments. Zinc-plated steel screws resist corrosion in wet environments. Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray.Coarse threads are the industry standard; choose these Hex nuts if you don’t know the threads per inch. Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.

The flange nuts is designed to fit a ratchet or spanner torque wrenches allowing you to tighten the nuts to your exact specifications. Grade 2 bolts tend to be used in construction for joining wood components. Grade 4.8 bolts are used in small engines. Grade 8.8 10.9 or 12.9 bolts provide high tensile strength. One advantage nuts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.

high strength flange nuts

Spesifikasi benang d		M5	M6	M8	M10	M12	M14	M16	M20
P	melempar	0.8	1	1.25	1.5	1.75	2	2	2.5
c	nilai minimum	1	1.1	1.2	1.5	1.8	2.1	2.4	3
dc	Nilai maksimum	11.8	14.2	17.9	21.8	26	29.9	34.5	42.8
e	nilai minimum	8.79	11.05	14.38	17.77	20.03	23.36	26.75	32.95
k	Nilai maksimum	5	6	8	10	12	14	16	20
k	nilai minimum	4.7	5.7	7.64	9.64	11.57	13.3	15.3	18.7
s	Nilai maksimum	8	10	13	16	18	21	24	30
s	nilai minimum	7.78	9.78	12.73	15.73	17.73	20.67	23.67	29.16