Introduzzjoni tal-Prodott
Ġewż hex huma wieħed mill-ġewż l-aktar komuni disponibbli u huma użati ma 'ankri, boltijiet, viti, studs, vireg bil-kamin u fuq kwalunkwe qfil ieħor li għandu ħjut bil-kamin tal-magni.Hex huwa qasir għal eżagon, li jfisser li għandhom sitt naħat.Hex n uts huma kważi dejjem użati flimkien ma 'bolt ta' tgħammir biex jitwaħħlu partijiet multipli flimkien. Iż-żewġ imsieħba jinżammu flimkien permezz ta 'kombinazzjoni tal-frizzjoni tal-ħjut tagħhom (b'deformazzjoni elastika ħafifa), tiġbid żgħir tal-bolt, u kompressjoni tal-partijiet li jinżammu flimkien.
Biex jiġi żgurat ingaġġ sħiħ tal-ħajta mal-ġewż hex, boltijiet/viti għandhom ikunu twal biżżejjed biex jippermettu mill-inqas żewġ ħjut sħaħ jestendu lil hinn mill-wiċċ tal-ġewż wara l-issikkar. Għall-kuntrarju, għandu jkun hemm żewġ ħjut sħaħ esposti fuq in-naħa tar-ras tal-ġewż biex kun żgur li l-ġewż jista 'jiġi ssikkat sew.
Applikazzjonijiet
Ġewż hex jista 'jintuża għal ħafna applikazzjonijiet differenti li jinkludu qfil ta' injam, azzar, u materjali oħra tal-kostruzzjoni għal proġetti bħal baċiri, pontijiet, strutturi ta 'awtostradi u bini.
Black-oxide steel screws are mildly corrosion resistant in dry environments.Zinc-plated steel screws resist corrosion in wet environments.Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray .Coarse threads are the industry standard; choose these Hex nuts if you don’t know the threads per inch.Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.
The Hex nuts is designed to fit a ratchet or spanner torque wrenches allowing you to tighten the nuts to your exact specifications.Grade 2 bolts tend to be used in construction for joining wood components.Grade 4.8 bolt s are used in small engines.Grade 8.8 10.9 or 12.9 bolt s provide high tensile strength.One advantage nuts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.
| Daqs bil-kamin d | M1
| M1.2
| M1.4
| M1.6
| (M1.7)
| M2
| (M2.3)
| M2.5
| (M2.6)
| M3
| (M3.5)
| M4
| M5
| M6
| (M7)
| M8
| ||||||||||||||||||
| P | żift | ħajt oħxon | 0.25 | 0.25 | 0.3 | 0.35 | 0.35 | 0.4 | 0.45 | 0.45 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | ||||||||||||||||
| mill-qrib | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | 1 | ||||||||||||||||||
| mill-qrib | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | ||||||||||||||||||
| m | Massimu = nominali | 0.8 | 1 | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2 | 2 | 2.4 | 2.8 | 3.2 | 4 | 5 | 5.5 | 6.5 | |||||||||||||||||
| l-inqas valur | 0.55 | 0.75 | 0.95 | 1.05 | 1.15 | 1.35 | 1.55 | 1.75 | 1.75 | 2.15 | 2.55 | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | ||||||||||||||||||
| mw | l-inqas valur | 0.44 | 0.6 | 0.76 | 0.84 | 0.92 | 1.08 | 1.24 | 1.4 | 1.4 | 1.72 | 2.04 | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | |||||||||||||||||
| s | Massimu = nominali | 2.5 | 3 | 3 | 3.2 | 3.5 | 4 | 4.5 | 5 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | |||||||||||||||||
| l-inqas valur | 2.4 | 2.9 | 2.9 | 3.02 | 3.38 | 3.82 | 4.32 | 4.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | ||||||||||||||||||
| e ① | l-inqas valur | 2.71 | 3.28 | 3.28 | 3.41 | 3.82 | 4.32 | 4.88 | 5.45 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | |||||||||||||||||
| * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||
| Elf biċċa ta 'piż (azzar) kg | 0.03 | 0.054 | 0.063 | 0.076 | 0.1 | 0.142 | 0.2 | 0.28 | 0.72 | 0.384 | 0.514 | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 | ||||||||||||||||||
| Daqs bil-kamin d | M10
| M12
| (M14)
| M16
| (M18)
| M20
| (M22)
| M24
| (M27)
| M30
| (M33)
| M36
| (M39)
| M42
| (M45)
| M48
| ||||||||||||||||||
| P | żift | ħajt oħxon | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | ||||||||||||||||
| mill-qrib | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | ||||||||||||||||||
| mill-qrib | 1.25 | 1.25 | / | / | 2 | 1.5 | 2 | / | / | / | / | / | / | / | / | / | ||||||||||||||||||
| m | Massimu = nominali | 8 | 10 | 11 | 13 | 15 | 16 | 18 | 19 | 22 | 24 | 26 | 29 | 31 | 34 | 36 | 38 | |||||||||||||||||
| l-inqas valur | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | ||||||||||||||||||
| mw | l-inqas valur | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | |||||||||||||||||
| s | Massimu = nominali | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | |||||||||||||||||
| l-inqas valur | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | ||||||||||||||||||
| e ① | l-inqas valur | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | |||||||||||||||||
| * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||
| Elf biċċa ta 'piż (azzar) kg | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | 79 | 110 | 165 | 223 | 288 | 393 | 502 | 652 | 800 | 977 | ||||||||||||||||||
| Daqs bil-kamin d | (M52) | M56 | (M60) | M64 | (M68) | M72 | (M76) | M80 | (M85) | M90 | M100 | M110 | M125 | M140 | M160 | |||||||||||||||||||
| P | żift | ħajt oħxon | 5 | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | / | / | / | / | |||||||||||||||||
| mill-qrib | 3 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |||||||||||||||||||
| mill-qrib | / | / | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | / | / | |||||||||||||||||||
| m | Massimu = nominali | 42 | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | 88 | 100 | 112 | 128 | ||||||||||||||||||
| l-inqas valur | 40.4 | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | 85.8 | 97.8 | 109.8 | 125.5 | |||||||||||||||||||
| mw | l-inqas valur | 32.3 | 34.7 | 37.1 | 39.3 | 41.7 | 44.9 | 47.3 | 49.7 | 52.9 | 56.1 | 62.5 | 68.6 | 78.2 | 87.8 | 100 | ||||||||||||||||||
| s | Massimu = nominali | 80 | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | 155 | 180 | 200 | 230 | ||||||||||||||||||
| l-inqas valur | 78.1 | 82.8 | 87.8 | 92.8 | 97.8 | 102.8 | 107.8 | 112.8 | 117.8 | 127.5 | 142.5 | 152.5 | 177.5 | 195.4 | 225.4 | |||||||||||||||||||
| e ① | l-inqas valur |
| 88.25 | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | 172.32 | 200.57 | 220.8 | 254.7 | |||||||||||||||||
| * |
| - | - | - | - | - | - | - | - | - | - | - | 170 | 196 | 216 | 248 | ||||||||||||||||||
| Elf biċċa ta 'piż (azzar) kg
| 1220 | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 | 8200 | 13000 | 17500 | 26500 | |||||||||||||||||||
Chipboard screws are self-tapping screws with a small screw diameter. It can be used for…
Drywall screws made of hardened carbon steel or stainless steel are used for fastening drywall to…
Flat washers are used to increase the bearing surface of a nut or fastener's head thus…
A wedge anchor is a mechanical type expansion anchor that consists of four parts: the…
Drop-In anchors are female concrete anchors designed for anchoring into concrete, these are often used…
flange nuts are one of the most common nuts available and are used with anchors, bolts,…
Metric Lock Nuts all have a feature that creates a non-permanent "locking" action. Prevailing Torque…
flange head bolts are used to fasten two or more parts together to form an…