Introduzzjoni tal-Prodott
Full threaded rods are common, readily available fasteners that are used in multiple construction applications. Rods are continuously threaded from one end to the other and are frequently referred to as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod) and a variety of other names and acronyms. Rods are typically stocked and sold in 3′, 6’, 10’ and 12’ lengths, or they can be chopped to a specific length. All thread rod that is cut to shorter lengths are often referred to as studs or fully threaded studs.
fully threaded studs have no head, are threaded along their entire length, and have a higher tensile strength. These studs are usually fastened with two nuts and used with objects that must be assembled and dissembled quickly.Acting as a pin that is used to connect two materials Threaded rods are used to fasten wood or metal.Full threaded rods come in the anti-corrosion stainless steel, alloy steel and carbon steel materials which ensures that the structure doesn’t weaken because of rust.
Applikazzjonijiet
Full threaded rods are used in many different construction applications. The rods can be installed in existing concrete slabs and used as epoxy anchors. Short studs can be used coupled to another fastener to extend its length. All thread can also be used as fast alternatives to anchor rods, used for pipe flange connections, and used as double arming bolts in the pole line industry. There are many other construction applications not mentioned here in which all thread rod or fully threaded studs are used.
Black-oxide steel screws are mildly corrosion resistant in dry environments. Zinc-plated steel screws resist corrosion in wet environments. Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray.Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch. Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.Grade 2 bolts tend to be used in construction for joining wood components. Grade 4.8 bolts are used in small engines. Grade 8.8 10.9 or 12.9 bolts provide high tensile strength. One advantage bolts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.
| Speċifikazzjonijiet bil-kamin d | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | M8 | M10 | M12 | (M14) | M16 | (M18) | |||||||||||||
| P | ħajt oħxon | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | ||||||||||||
| mill-qrib | / | / | / | / | / | / | / | 1 | 1.25 | 1.5 | 1.5 | 1.5 | 1.5 | |||||||||||||
| mill-qrib | / | / | / | / | / | / | / | / | 1 | 1.25 | / | / | / | |||||||||||||
| Elf biċċa ta 'piż (azzar) kg | 18.7 | 30 | 44 | 60 | 78 | 124 | 177 | 319 | 500 | 725 | 970 | 1330 | 1650 | |||||||||||||
| Speċifikazzjonijiet bil-kamin d | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | ||||||||||||||
| P | ħajt oħxon | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 | |||||||||||||
| mill-qrib | 1.5 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | ||||||||||||||
| mill-qrib | / | / | / | / | / | / | / | / | / | / | / | / | ||||||||||||||
| Elf biċċa ta 'piż (azzar) kg | 2080 | 2540 | 3000 | 3850 | 4750 | 5900 | 6900 | 8200 | 9400 | 11000 | 12400 | 14700 | ||||||||||||||
Chipboard screws are self-tapping screws with a small screw diameter. It can be used for…
Drywall screws made of hardened carbon steel or stainless steel are used for fastening drywall to…
Flat washers are used to increase the bearing surface of a nut or fastener's head thus…
A wedge anchor is a mechanical type expansion anchor that consists of four parts: the…
Drop-In anchors are female concrete anchors designed for anchoring into concrete, these are often used…
flange nuts are one of the most common nuts available and are used with anchors, bolts,…
Metric Lock Nuts all have a feature that creates a non-permanent "locking" action. Prevailing Torque…
flange head bolts are used to fasten two or more parts together to form an…