DIN933/931 GB5782/5783 BLACK/GALVANIZED HEXAGON BOLTS

Description:

Hex pessulis duabus vel pluribus simul partibus ad contionem iungendis adhibita est vel quia una pars confici non potest vel ad alimenta et discontationem reparanda permittit.

Contact now usque ad onus pdf *

Tags

Product Introduction

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly.Hex bolts are mostly used in repair and construction work. they have a hexagonal head and come with machine threads for a firm and rough handling. They come in a wide range of different hex bolt sizes for custom applications depending on its dimensional requirements. These Hex Bolts come in the anti-corrosion stainless steel, alloy steel and carbon steel materials which ensures that the structure doesn’t weaken because of rust. Depending on the length of the bolt, it can come with standard threading or full threading.

Hex fulmina adhiberi possunt multis applicationibus diversis quae ligatura ligna, chalybe, aliaque materia fabricandi causarum includunt ut navalia, pontes, structurae et aedificia via. Hex fulmina cum fictis capitibus quoque vulgo dicuntur pro ancoris ancoris.

DIN931 hex bolts

Black-oxide steel screws are mildly corrosion resistant in dry environments. Zinc-plated steel screws resist corrosion in wet environments. Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray.Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch. Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.

The bolt head is designed to fit a ratchet or spanner torque wrenches allowing you to tighten the bolt to your exact specifications. Hex head bolts are typically used to create a bolted joint, in which a threaded shaft exactly fits a corresponding tapped hole or nut. Grade 2 bolts tend to be used in construction for joining wood components. Grade 4.8 bolts are used in small engines. Grade 8.8 10.9 or 12.9 bolts provide high tensile strength. One advantage bolts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.

hex bolts

filo speciem d					M1.6	M2		M2.5		M3		(M3.5)		M4		M5		M6		(M7)		M8		M10		M12		(M14)		M16
P	picis				0.35	0.4		0.45		0.5		0.6		0.7		0.8		1		1		1.25		1.5		1.75		2		2
a	Maximum valorem				1.05	1.2		1.35		1.5		1.8		2.1		2.4		3		3		3.75		4.5		5.25		6		6
c	minimum valorem				0.1	0.1		0.1		0.15		0.15		0.15		0.15		0.15		0.15		0.15		0.15		0.15		0.15		0.2
	Maximum valorem				0.25	0.25		0.25		0.4		0.4		0.4		0.5		0.5		0.5		0.6		0.6		0.6		0.6		0.8
et	Maximum valorem				2	2.6		3.1		3.6		4.1		4.7		5.7		6.8		7.8		9.2		11.2		13.7		15.7		17.7
dw*	A level		minimum valorem		2.4	3.2		4.1		4.6		5.1		5.9		6.9		8.9		9.6		11.6		15.6		17.4		20.5		22.5
	B level		minimum valorem		-	-		-		-		-		5.7		6.7		8.7		9.4		11.4		15.4		17.2		20.1		22
e	A level		minimum valorem		3.41	4.32		5.45		6.01		6.58		7.66		8.79		11.05		12.12		14.38		18.9		21.1		24.49		26.75
	B level		minimum valorem		-	-		-		-		-		7.5		8.63		10.89		11.94		14.2		18.72		20.88		23.91		26.17
k	nominale				1.1	1.4		1.7		2		2.4		2.8		3.5		4		4.8		5.3		6.4		7.5		8.8		10
	A level		minimum valorem		0.98	1.28		1.58		1.88		2.28		2.68		3.35		3.85		4.65		5.15		6.22		7.32		8.62		9.82
			Maximum valorem		1.22	1.52		1.82		2.12		2.52		2.92		3.65		4.15		4.95		5.45		6.56		7.68		8.98		10.18
	B level		minimum valorem		-	-		-		-		-		2.6		3.26		3.76		4.56		5.06		6.11		7.21		8.51		9.71
			Maximum valorem		-	-		-		-		-		3		3.74		4.24		5.04		5.54		6.69		7.79		9.09		10.29
k1	minimum valorem				0.7	0.9		1.1		1.3		1.6		1.9		2.28		2.63		3.19		3.54		4.28		5.05		5.96		6.8
r	minimum valorem				0.1	0.1		0.1		0.1		0.1		0.2		0.2		0.25		0.25		0.4		0.4		0.6		0.6		0.6
s	Maximum valorem = nominal				3.2	4		5		5.5		6		7		8		10		11		13		17		19		22		24
	A level		minimum valorem		3.02	3.82		4.82		5.32		5.82		6.78		7.78		9.78		10.73		12.73		16.73		18.67		21.67		23.67
	B level		minimum valorem		-	-		-		-		-		6.64		7.64		9.64		10.57		12.57		16.57		18.48		21.16		23.16
Mille pondo ferri ≈kg					-	-		-		-		-		-		-		-		-		-		-		-		-		-
filo speciem d					(M18)		M20		(M22)		M24		(M27)		M30		(M33)		M36		(M39)		M42		(M45)		M48		(M52)
P		picis			2.5		2.5		2.5		3		3		3.5		3.5		4		4		4.5		4.5		5		5
a		Maximum valorem			7.5		7.5		7.5		9		9		10.5		10.5		12		12		13.5		13.5		15		15
c		minimum valorem			0.2		0.2		0.2		0.2		0.2		0.2		0.2		0.2		0.3		0.3		0.3		0.3		0.3
		Maximum valorem			0.8		0.8		0.8		0.8		0.8		0.8		0.8		0.8		1		1		1		1		1
et		Maximum valorem			20.2		22.4		24.4		26.4		30.4		33.4		36.4		39.4		42.4		45.6		48.6		52.6		56.6
dw*		A level		minimum valorem	25.3		28.2		30		33.6		-		-		-		-		-		-		-		-		-
		B level		minimum valorem	24.8		27.7		29.5		33.2		38		42.7		46.5		51.1		55.9		59.9		64.7		69.4		74.2
e		A level		minimum valorem	30.14		33.53		35.72		39.98		-		-		-		-		-		-		-		-		-
		B level		minimum valorem	29.56		32.95		35.03		39.55		45.2		50.85		55.37		60.79		66.44		71.3		76.95		82.6		88.25
k		nominale			11.5		12.5		14		15		17		18.7		21		22.5		25		26		28		30		33
		A level		minimum valorem	11.28		12.28		13.78		14.78		-		-		-		-		-		-		-		-		-
				Maximum valorem	11.72		12.72		14.22		15.22		-		-		-		-		-		-		-		-		-
		B level		minimum valorem	11.15		12.15		13.65		14.65		16.65		18.28		20.58		22.08		24.58		25.58		27.58		29.58		32.5
				Maximum valorem	11.85		12.85		14.35		15.35		17.35		19.12		21.42		22.92		25.42		26.42		28.42		30.42		33.5
k1		minimum valorem			7.8		8.5		9.6		10.3		11.7		12.8		14.4		15.5		17.2		17.9		19.3		20.9		22.8
r		minimum valorem			0.6		0.8		0.8		0.8		1		1		1		1		1		1.2		1.2		1.6		1.6
s		Maximum valorem = nominal			27		30		32		36		41		46		50		55		60		65		70		75		80
		A level		minimum valorem	26.67		29.67		31.61		35.38		-		-		-		-		-		-		-		-		-
		B level		minimum valorem	26.15		29.16		31		35		40		45		49		53.8		58.8		63.1		68.1		73.1		78.1
Mille pondo ferri ≈kg					-		-		-		-		-		-		-		-		-		-		-		-		-