A193-B7/A194-2H 검정색 스터드 볼트

간단한 설명:

전체 나사형 로드는 여러 건설 응용 분야에 사용되는 일반적이고 쉽게 사용할 수 있는 패스너입니다. 로드는 한쪽 끝에서 다른 쪽 끝으로 연속적으로 나사산이 형성되어 있으며 완전 나사산 로드, redi 로드, TFL 로드(Thread Full Length), ATR(모든 스레드 로드) 및 기타 다양한 이름과 약어로 자주 불립니다.

지금 연락하세요 PDF로 다운로드

공유하다

세부 사항

Full threaded rods are common, readily available fasteners that are used in multiple construction applications. Rods are continuously threaded from one end to the other and are frequently referred to as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod) and a variety of other names and acronyms. Rods are typically stocked and sold in 3′, 6’, 10’ and 12’ lengths, or they can be chopped to a specific length. All thread rod that is cut to shorter lengths are often referred to as studs or fully threaded studs.

fully threaded studs have no head, are threaded along their entire length, and have a higher tensile strength. These studs are usually fastened with two nuts and used with objects that must be assembled and dissembled quickly.Acting as a pin that is used to connect two materials Threaded rods are used to fasten wood or metal.Full threaded rods come in the anti-corrosion stainless steel, alloy steel and carbon steel materials which ensures that the structure doesn’t weaken because of rust.

응용

Full threaded rods are used in many different construction applications. The rods can be installed in existing concrete slabs and used as epoxy anchors. Short studs can be used coupled to another fastener to extend its length. All thread can also be used as fast alternatives to anchor rods, used for pipe flange connections, and used as double arming bolts in the pole line industry. There are many other construction applications not mentioned here in which all thread rod or fully threaded studs are used.

Black-oxide steel screws are mildly corrosion resistant in dry environments. Zinc-plated steel screws resist corrosion in wet environments. Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray.Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch. Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.Grade 2 bolts tend to be used in construction for joining wood components. Grade 4.8 bolts are used in small engines. Grade 8.8 10.9 or 12.9 bolts provide high tensile strength. One advantage bolts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.

a193-b7 stud bolt

나사산 사양 d			M2	M2.5		M3		(M3.5)		M4		M5		M6		M8		M10		M12		(M14)		M16		(M18)
P	거친 실		0.4	0.45		0.5		0.6		0.7		0.8		1		1.25		1.5		1.75		2		2		2.5
	밀접하게		/	/		/		/		/		/		/		1		1.25		1.5		1.5		1.5		1.5
	밀접하게		/	/		/		/		/		/		/		/		1		1.25		/		/		/
천개의 무게(강철) kg			18.7	30		44		60		78		124		177		319		500		725		970		1330		1650
나사산 사양 d			M20		(M22)		M24		(M27)		M30		(M33)		M36		(M39)		M42		(M45)		M48		(M52)
P		거친 실	2.5		2.5		3		3		3.5		3.5		4		4		4.5		4.5		5		5
		밀접하게	1.5		1.5		2		2		2		2		3		3		3		3		3		3
		밀접하게	/		/		/		/		/		/		/		/		/		/		/		/
천개의 무게(강철) kg			2080		2540		3000		3850		4750		5900		6900		8200		9400		11000		12400		14700