perkenalan produk
Mur hex adalah salah satu mur paling umum yang tersedia dan digunakan dengan jangkar, baut, sekrup, stud, batang berulir, dan pengikat lainnya yang memiliki ulir sekrup mesin. Hex adalah kependekan dari segi enam, yang artinya memiliki enam sisi. Hex n uts hampir selalu digunakan bersama dengan baut kawin untuk mengencangkan beberapa bagian menjadi satu. Kedua pasangan disatukan oleh kombinasi gesekan benangnya (dengan sedikit deformasi elastis), sedikit peregangan pada baut, dan kompresi bagian-bagiannya. untuk diselenggarakan bersama.
Untuk memastikan pengikatan ulir penuh dengan mur segi enam, baut/sekrup harus cukup panjang untuk memungkinkan setidaknya dua ulir penuh melampaui permukaan mur setelah pengencangan. Sebaliknya, harus ada dua ulir penuh yang terbuka di sisi kepala mur untuk pastikan mur dapat dikencangkan dengan benar.
Aplikasi
Kacang hex dapat digunakan untuk berbagai aplikasi yang mencakup pengikatan kayu, baja, dan bahan konstruksi lainnya untuk proyek seperti dermaga, jembatan, struktur jalan raya, dan bangunan.
Black-oxide steel screws are mildly corrosion resistant in dry environments.Zinc-plated steel screws resist corrosion in wet environments.Black ultra-corrosion-resistant-coated steel screws resist chemicals and withstand 1,000 hours of salt spray .Coarse threads are the industry standard; choose these Hex nuts if you don’t know the threads per inch.Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the resistance.
The Hex nuts is designed to fit a ratchet or spanner torque wrenches allowing you to tighten the nuts to your exact specifications.Grade 2 bolts tend to be used in construction for joining wood components.Grade 4.8 bolt s are used in small engines.Grade 8.8 10.9 or 12.9 bolt s provide high tensile strength.One advantage nuts fasteners have over welds or rivets is that they allow for easy disassembly for repairs and maintenance.
| Ukuran berulir d | M1
| M1.2
| M1.4
| M1.6
| (M1.7)
| M2
| (M2.3)
| M2.5
| (M2.6)
| M3
| (M3.5)
| M4
| M5
| M6
| (M7)
| M8
| ||||||||||||||||||
| P | melempar | benang kasar | 0.25 | 0.25 | 0.3 | 0.35 | 0.35 | 0.4 | 0.45 | 0.45 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | ||||||||||||||||
| bernada dekat | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | 1 | ||||||||||||||||||
| bernada dekat | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | ||||||||||||||||||
| m | Maksimum = nominal | 0.8 | 1 | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2 | 2 | 2.4 | 2.8 | 3.2 | 4 | 5 | 5.5 | 6.5 | |||||||||||||||||
| nilai paling kecil | 0.55 | 0.75 | 0.95 | 1.05 | 1.15 | 1.35 | 1.55 | 1.75 | 1.75 | 2.15 | 2.55 | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | ||||||||||||||||||
| mw | nilai paling kecil | 0.44 | 0.6 | 0.76 | 0.84 | 0.92 | 1.08 | 1.24 | 1.4 | 1.4 | 1.72 | 2.04 | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | |||||||||||||||||
| s | Maksimum = nominal | 2.5 | 3 | 3 | 3.2 | 3.5 | 4 | 4.5 | 5 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | |||||||||||||||||
| nilai paling kecil | 2.4 | 2.9 | 2.9 | 3.02 | 3.38 | 3.82 | 4.32 | 4.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | ||||||||||||||||||
| e ① | nilai paling kecil | 2.71 | 3.28 | 3.28 | 3.41 | 3.82 | 4.32 | 4.88 | 5.45 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | |||||||||||||||||
| * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||
| Beratnya seribu keping (baja) kg | 0.03 | 0.054 | 0.063 | 0.076 | 0.1 | 0.142 | 0.2 | 0.28 | 0.72 | 0.384 | 0.514 | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 | ||||||||||||||||||
| Ukuran berulir d | M10
| M12
| (M14)
| M16
| (M18)
| M20
| (M22)
| M24
| (M27)
| M30
| (M33)
| M36
| (M39)
| M42
| (M45)
| M48
| ||||||||||||||||||
| P | melempar | benang kasar | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | ||||||||||||||||
| bernada dekat | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | ||||||||||||||||||
| bernada dekat | 1.25 | 1.25 | / | / | 2 | 1.5 | 2 | / | / | / | / | / | / | / | / | / | ||||||||||||||||||
| m | Maksimum = nominal | 8 | 10 | 11 | 13 | 15 | 16 | 18 | 19 | 22 | 24 | 26 | 29 | 31 | 34 | 36 | 38 | |||||||||||||||||
| nilai paling kecil | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | ||||||||||||||||||
| mw | nilai paling kecil | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | |||||||||||||||||
| s | Maksimum = nominal | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | |||||||||||||||||
| nilai paling kecil | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | ||||||||||||||||||
| e ① | nilai paling kecil | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | |||||||||||||||||
| * | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||
| Beratnya seribu keping (baja) kg | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | 79 | 110 | 165 | 223 | 288 | 393 | 502 | 652 | 800 | 977 | ||||||||||||||||||
| Ukuran berulir d | (M52) | M56 | (M60) | M64 | (M68) | M72 | (M76) | M80 | (M85) | M90 | M100 | M110 | M125 | M140 | M160 | |||||||||||||||||||
| P | melempar | benang kasar | 5 | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | / | / | / | / | |||||||||||||||||
| bernada dekat | 3 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |||||||||||||||||||
| bernada dekat | / | / | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | / | / | |||||||||||||||||||
| m | Maksimum = nominal | 42 | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | 88 | 100 | 112 | 128 | ||||||||||||||||||
| nilai paling kecil | 40.4 | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | 85.8 | 97.8 | 109.8 | 125.5 | |||||||||||||||||||
| mw | nilai paling kecil | 32.3 | 34.7 | 37.1 | 39.3 | 41.7 | 44.9 | 47.3 | 49.7 | 52.9 | 56.1 | 62.5 | 68.6 | 78.2 | 87.8 | 100 | ||||||||||||||||||
| s | Maksimum = nominal | 80 | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | 155 | 180 | 200 | 230 | ||||||||||||||||||
| nilai paling kecil | 78.1 | 82.8 | 87.8 | 92.8 | 97.8 | 102.8 | 107.8 | 112.8 | 117.8 | 127.5 | 142.5 | 152.5 | 177.5 | 195.4 | 225.4 | |||||||||||||||||||
| e ① | nilai paling kecil |
| 88.25 | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | 172.32 | 200.57 | 220.8 | 254.7 | |||||||||||||||||
| * |
| - | - | - | - | - | - | - | - | - | - | - | 170 | 196 | 216 | 248 | ||||||||||||||||||
| Beratnya seribu keping (baja) kg
| 1220 | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 | 8200 | 13000 | 17500 | 26500 | |||||||||||||||||||
Chipboard screws are self-tapping screws with a small screw diameter. It can be used for…
Drywall screws made of hardened carbon steel or stainless steel are used for fastening drywall to…
A ring split at one point and bent into a helical shape. This causes the…
Flat washers are used to increase the bearing surface of a nut or fastener's head thus…
A wedge anchor is a mechanical type expansion anchor that consists of four parts: the…
Drop-In anchors are female concrete anchors designed for anchoring into concrete, these are often used…
flange nuts are one of the most common nuts available and are used with anchors, bolts,…
Metric Lock Nuts all have a feature that creates a non-permanent "locking" action. Prevailing Torque…
flange head bolts are used to fasten two or more parts together to form an…