DROP-IN ANCHORS

Drop-In anchors are female concrete anchors designed for anchoring into concrete, these are often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt.

It consists of two parts: the expander plug and the anchor body. The expander plug and anchor body come preassembled and ready for installation.To install, place the anchor into the hole, insert the required setting tool expands the anchor within the hole in the concrete, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface.

Drop-in anchors are concrete fasteners designed for use in solid concrete only. Once the fastener is set, it becomes permanent.Simply drill the correct size hole, clean the hole, install the anchor, and use a setting tool to set the anchor.They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. a drop-in setting tool must be for proper installation.